Epoxy Reducer

Quart of Reducer $16.50

Gallon of Reducer $66.00

 

 

Due to shipping regulations and restrictions please contact us to order.

 

 

(480) 834-0324

squeegshrc@gmail.com

Epoxy Reducer

      DIRECTIONS: For Primer reducer is not necessary. However, the finish will be smoother when reducer

is used on final coats to allow for easier wet sanding. Follow mixing instructions thoroughly on Part A &

Part B of Squeeg's Kustoms Epoxy Primer Filler Kit components before adding reducer.Then add 10% (or more if needed) reduction to Pre- mixed Part A & Part B Epoxy primer for a smoother gun finish.  Reducer can be added before or  after induction period. For Squeeg's Kustoms Epoxy Top Coat Kits use equal parts Epoxy, Catalyst and Reducer.

CAUTION!

Vapors Harmful & Extremely Flammable

A properly fitted NIOSH/MSHA approved respirator for protection against solvents and spray mists is required.

Avoid breathing vapors and spray mists. If you have chronic lung or breathing problems, do not use. Avoid contact with skin or eyes. Do not take internally. Harmful or fatal if swallowed. Do not use on objects used by children. Keep away from heat, sparks, and open flames. Vapors may cause flash fire. After using, close container immediately. Keep cap or cover tight and container upright. Contains Ketones, Alcohols and Aromatic solvents. The manufacturer has no control over preparation or application, therefore there is no warranty expressed or implied

 

KEEP OUT OF REACH OF CHILDREN

Prop 65 1x4 Flat.jpg

Squeeg's Kustoms

  • Facebook - Grey Circle
  • Instagram - Grey Circle

© 2019 Squeeg's Kustoms

All Rights Reserved

Squeeg's Hot Rod Connection

  • Facebook - Grey Circle
  • Instagram - Grey Circle